SMA Technologie AG Mounting the Device
Technical Description SI5048-11:EE4206 Page 29
To make the job easier, we recommend
using the supplied wall bracket to mount
the Sunny Island 5048 and using a spirit
level to ensure correct alignment. Fix the
wall bracket using three screws (8 mm
diameter).
The figure below displays the distances of
the drill holes in detail for installing the
wall bracket. The two outer screws are
used to keep the Sunny Island 5048
securely attached to the wall.
The ambient temperature must not be outside the -25 °C to +50 °C range.
700 mm
235 mm
215 mm
105 mm
Screws for securing the device in position
To Next Page
Loading...
