Mounting the Device SMA Technologie AG
Page 30 SI5048-11:EE4206 Technical Description
Keep to the following sequence when installing
the Sunny Island 5048:
• Mount the wall bracket (1). To mark the
positions to drill the holes, you can use the
wall bracket as a drilling template.
• Now hang the Sunny Island 5048 onto the
wall bracket using its mounting plate so that
it cannot be moved sideways.
• Secure the Sunny Island 5048 in position by
screwing the supplied screw onto the wall
bracket.
• Insert the upper right and left air grills (they
only need to be snapped on).
• Make sure that the Sunny Island 5048 is
positioned securely on the bracket.
To Next Page
Loading...
