SMA SUNNY TRIPOWER X 20-US - Establishing a Connection Via Ethernet in the Local Network

8 Operation
SMA Solar Technology AG
Operating manualSTPxx-US-50-BE-en-1158
Port and URL Use
Port 123 (NTP)
ntp.sunny-portal.com
Time synchronization with SunnyPortal (if not
provided by the Internet router)
Port 443 (https/TLS)
ldm-devapi.sunnyportal.com
Data transmission
Port 443 (https/TLS)
ennexos.sunnyportal.com
User interface
Port 9524 (TCP)
wco.sunnyportal.com
SMA Webconnect 1.5 and SMA SPOT
8.1.1.3 Establishing a Connection via Ethernet in the local network
Requirements:
☐ The product must be connected to the local network via a network cable (e.g. via a router).
☐ The product must be integrated into the local network. Tip: You can change the network
configuration on the welcome page of the product.
☐ A smart device (e.g. laptop) must be available.
☐ The smart device must be in the same local network as the product.
☐ The respective latest version of one of the following web browsers must be installed on the
smart device: Chrome, Edge, Firefox or Safari.
Procedure:
1. Open the web browser of your smart device.
2. Enter the access address of the product in the address bar of the web browser.
3.
Web browser displays warning
After the access address of the product has been entered, a message might appear
indicating that the connection to the user interface of the product is not secure.
• Continue loading the user interface (scroll to bottom and click proceed/advance).
☑ When you connect to the user interface for the first time, the welcome page opens. The
Commissioning Assistant for configuring the product can be started via the welcome page.
☑ The login page of the user interface opens if the product has already been configured.
Also see:
• SMA Speedwire⇒page24
• Access addresses for the product in the local network⇒page57
• Ports for data communication in the local network⇒page57