22
System Disarmed
All the sensors stop detecting except any sensors that you may have set to 24-Hour
Zone. 24-Hour Zone Sensors will continuously monitor a particular area. For example,
an extra smanos water sensor which has been set to 24-Hour Zone by default and
installed near a washing machine would trigger alarm if water is detected, regardless of
system status.
Tap on the [
] icon on the app or press the [ ] button once on the hub/remote
or hold the RFID tag close to the RFID reader and swipe once within 2 seconds to
disarm the system.
All sensors will stop detecting when the system is disarmed.
Note: Sensors set in 24-Hour Zone will continuously monitor, regardless of system status. You can nd more
details about this type of sensor on page 35.
To Next Page
