19
20
In the X500 Alarm App, this setting can be done as follows:
Store emergency SMS numbers
Emergency SMS numbers are the numbers that should be text to when the alarm goes
off. When sending “6“ to the SIM card in the control panelyou will receive the current
settings. Copy and edit this text message and send it back. After sending the message
it will send back a message from the control panel to confirm the new settings.
TEL:
IMPORTANT: Only phone numbers stored in the alarm system can make
changes and modify the system.
SMS:
1. 6123654789
2. 6123654788
3. 6123654787
4. 6123654786
5. 6123654785
Store emergency telephone numbers
Emergency numbers are the telephone numbers which have to be called when the
alarm goes off. To get a list of the current settings, send “5“ to the control panel.
TEL:
1.
2.
3.
4.
5.
TEL:
1. 6123654789
2. 6123654788
3. 6123654787
4. 6123654786
5. 6123654785
Forward Edit
Store alarm phone No. successfully.
Copy the received SMS message entirely and paste it into a new text
message. Here you can fill in five numbers you would like to. You can
specify multiple phone numbers in the same text message. When you
have finished the entry, the message can be sent.
Right is an example
of a list of numbers
filled in the text
message.
After sending the message there will be sent back a message from the control panel to
confirm the new settings.
Note: When alarming, the control panel will call these numbers for three rounds
at most, if the phone is pick up with operation on phone button, the system will
stop calling .
6
5
PIR-900 Wireless PIR Motion Detector
IMPORTANT: WHEN SINGLE DELAY ZONE IS SELECTED, THE SENSOR
WILL ALWAYS BE IN THE NORMAL ZONE. IT IS NOT POSSIBLE TO PLACE IT IN
THE HOME GROUP.
5
TIP: Always start the SIM card telephone number with the area code of your
country (eg. 0031 for the Netherlands). This will allow you to operate the alarm
system abroad.
8
17
18
19
20
24
X500 Alarm
X500 Alarm
smanos holding...
To Next Page
Loading...
