SMART Board M600ix3 - Chapter 4: Maintenance and Care; Whiteboard Maintenance and Protection; Projector Cleaning and Lamp Replacement

Chapter 4
27 smarttech.com/kb/170910
Chapter 4: Maintaining the interactive
whiteboard system
Maintaining the interactive whiteboard 27
Preventing damage to the interactive whiteboard 27
Keeping the writing surface clean 28
Cleaning the projector 28
Focusing and adjusting the projector image 29
Replacing the projector lamp 29
Removing and replacing the projector lamp module 29
Resetting the lamp hours 36
This chapter includes methods for properly cleaning and preventing damage to the SMARTBoard
interactive whiteboard system.
Maintaining the interactive whiteboard
For information on maintaining the interactive whiteboard, see the SMARTBoard M600 interactive
whiteboard installation guide (smarttech.com/kb/170555).
With proper care, the SMARTBoard interactive whiteboard will provide years of trouble-free
service.
Preventing damage to the interactive whiteboard
Although the interactive whiteboard’s surface is very durable, take the following precautions to
prevent damage.
l Don’t use sharp or pointed objects, such as ballpoint pens or pointers, as writing tools.
l Replace the pen nib when the nib wears out.
l Don’t use low-odor dry-erase markers because they can be very difficult to erase. Use
standard (high-odor) dry-erase markers that show a warning to use them only in well-ventilated
areas.
l Don’t use adhesive tape on the interactive surface.