SMART Board M600ix3 - Field Definitions

APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
78 smarttech.com/kb/170910
Field definitions
Field Possible values Description
target autosignal
l
= on
l
= off
The ranges must match the OSD settings.
current autosignal
l
on
l
off
The ranges must match the OSD settings.
target lampreminder
l
= on
l
= off
The ranges must match the OSD settings.
current lampreminder
l
on
l
off
The ranges must match the OSD settings.
target lampmode
l
= standard
l
= ECO
The ranges must match the OSD settings.
current lampmode
l
standard
l
ECO
The ranges must match the OSD settings.
target ImageCare
l
= on
l
= off
The ranges must match the OSD settings.
current ImageCare
l
on
l
off
The ranges must match the OSD settings.
target autopoweroff
l
+ val
l
– val
l
= 0 to 240
The ranges must match the OSD ranges.
current autopoweroff
l
+ val
l
– val
l
= 0 to 240
The ranges must match the OSD ranges.
target zoom
l
+ val
l
– val
l
= 0 to 30
The ranges must match the OSD ranges.
current zoom
l
= 0 to 30 The ranges must match the OSD ranges.
target projectorid
l
+ val
l
– val
l
= 0 to 999
The ranges must match the OSD ranges.