SMART Board M600ix3 - Page 87

APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
79 smarttech.com/kb/170910
Field Possible values Description
current projectorid
l
= 0 to 999 The ranges must match the OSD ranges.
target aspectratio
l
= fill
l
= match
l
= 16:9
The ranges must match the OSD ranges.
Fill:
Regardless of the input, the image is stretched
to match the DMD device. For example, a 16:9
image appears as a 4:3 image on an XGA
projector and as a 16:10 image on a WXGA
projector.
Match:
The signal is scaled so that the input aspect
ratio is maintained. For example, a 4:3 image
appears as a 4:3 image on screen.
16:9
The signal is scaled and stretched to produce a
16:9 image.
current aspectratio
l
fill
l
match
l
16:9
The ranges must match the OSD settings.
target projectionmode
l
= front
l
= ceiling
l
= rear
l
= rear ceiling
The ranges must match the OSD settings.
current
projectionmode
l
= front
l
= ceiling
l
= rear
l
= rear ceiling
The ranges must match the OSD settings.
target startupscreen
l
= smart
l
= usercapture
l
= preview
The ranges must match the OSD settings.
current startupscreen
l
= smart
l
= usercapture
l
= preview
The ranges must match the OSD settings.