SMART Board M600ix3 - Service Information; Command;Response Definitions; Field Definitions

APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
83 smarttech.com/kb/170910
Service Information
These commands are used in servicing and manufacturing the projector. They are hidden from the
user during normal operation.
Command/response definitions
Command Response Powered off
get displayhour displayhour=[current] no
set testpattern [target] testpattern=[current] no
set colorwheelidx
[target]
colorwheelidx=
[current]
no
get colorwheelidx colorwheelidx=
[current]
no
get failurelog failurelog=[current] yes
get error# error#=[current] yes
set factoryreset
[target]
factoryreset=[current] yes
set highspeedfan
[target]
highspeedfan=
[current]
no
get highspeedfan highspeedfan=
[current]
no
set statereporting
[target]
statereporting=
[current]
yes
get statereporting statereporting=
[current]
yes
get poweroverride poweroverride=
[current]
no
set poweroverride
[target]
poweroverride=
[current]
no
Field definitions
Field
Possible Values
Description
current displayhour 0 to 20000 Current display hours.
target testpattern = 1 to 4 Set the test pattern to pattern number (1 to 4). If
there’s only one test pattern, call it test
pattern1.