SMART Board M600ix3 - Page 90

APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
82 smarttech.com/kb/170910
Field Possible values Description
current projectorname user string
target locationinfo = user string
current locationinfo user string
target contactinfo = user string
current contactinfo user string
current modelnum user string Must match the OSD setting
current videomute
l
on
l
off
Must match the OSD setting.
target videomute
l
= on
l
= off
Must match the OSD setting.
current
vgaoutnetenable
l
on
l
off
Status of VGA Out Enable and Network Enable
target
vgaoutnetenable
l
= on
l
= off
Value for VGA Out and Network Enable
current
emergencyalertmsg
User string Emergency Alert message
target
emergencyalertmsg
= User string Set the Emergency Alert message
current
emergencyalert
l
on
l
off
To display the alert message, set this value to
“on.”
target
emergencyalertmsg
l
= on
l
= off
If the message is being displayed, “on” is
returned.
current signaldetected
l
true
l
false
If a signal is detected, “true” is returned.
Command List .... A list of commands appears. This list doesn’t
include service information commands.