SMART Board M600ix3 - Before You Start; Locating Status Lights

CHAPTER 5
TROUBLESHOOTING THE INTERACTIVE WHITEBOARD SYSTEM
38 smarttech.com/kb/170910
This chapter provides basic troubleshooting information for the interactive whiteboard system.
For issues not covered in this chapter, consult the SMARTSupport website
(smarttech.com/support) or contact your authorized SMART reseller (smarttech.com/where).
Before you start
Before you troubleshoot the interactive whiteboard system or contact SMARTSupport or your
authorized SMART reseller for assistance, you need to do the following:
l Locate the interactive whiteboard system’s status lights.
l Locate the interactive whiteboard system’s serial numbers.
Locating status lights
The interactive whiteboard system consists of several components, and each has its own status
light:
l The Select button on the interactive whiteboard's pen tray also functions as a status light.
l
The projector’s Power , Service light, and Diagnostic Indicator are located on the bottom
of the projector.