APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
77 smarttech.com/kb/170910
Command Response Powered off
get serialnum serialnum=[current] yes
get fwverecp fwverecp=[current] yes
set language [target] language=[current] no
get language language=[current] no
set groupname [target] groupname=[current] no
get groupname groupname=[current] no
set projectorname
[target]
projectorname=
[current]
no
get projectorname projectorname=
[current]
no
set locationinfo [target] locationinfo=[current] no
get locationinfo locationinfo=[current] no
set contactinfo [target] contactinfo=[current] no
get contactinfo contactinfo=[current] no
get modelnum modelnum=U100, or
modelnum=U100w
no
Returns the actual model of the projector
set videomute [target] videomute=[current] no
get videomute videomute=[current] no
set vgaoutnetenable
[target]
vgaoutnetenable=
[current]
yes
get vgaoutnetenable vgaoutnetenable=
[current]
yes
set
emergencyalertmsg
[target]
emergencyalertmsg=
[current]
no
get
emergencyalertmsg
emergencyalertmsg=
[current]
no
set emergencyalert
[target]
emergencyalert=
[current]
no
get emergencyalert emergencyalert=
[current]
no
get signaldetected signaldetected=
[current]
yes
The response varies depending on the power
mode.
To Next Page
Loading...
