APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
67 smarttech.com/kb/170910
get saturation saturation=[current] no
set tint [target] tint=[current] no
get tint tint=[current] no
set sharpness [target] sharpness=[current] no
get sharpness sharpness=[current] no
set hposition [target] hposition=[current] no
get hposition hposition=[current] no
set vposition [target] vposition=[current] no
get vposition vposition=[current] no
set whitepeaking [target] whitepeaking=[current] no
get whitepeaking whitepeaking=[current] no
set degamma [target] degamma=[current] no
get degamma degamma=[current] no
set red [target] red=[current] no
get red red=[current] no
set green [target] green=[current] no
get green green=[current] no
set blue [target] blue=[current] no
get blue blue=[current] no
set cyan [target] cyan=[current] no
get cyan cyan=[current] no
set magenta [target] magenta=[current] no
get magenta magenta=[current] no
set yellow [target] yellow=[current] no
get yellow yellow=[current] no
set videofreeze [target] videofreeze=[current] no
get videofreeze videofreeze=[current] no
To Next Page
Loading...
