Chapter 2
smarttech.com/kb/001414 12
Chapter 2: Installing and securing your interactive
whiteboard
Environmental requirements 12
Wall mounting your interactive whiteboard 13
Recommended heights for wall-mounting 13
For children or for adults in wheelchairs 14
For adults of average height 14
For children and short adults, and for clearing obstructions to the projected image 14
Tools required to wall-mount your interactive whiteboard 15
Wall-mounting your interactive whiteboard 16
Aligning your interactive whiteboard with your projector 20
Completing your installation 20
Securing and removing the pen tray 23
Locking the pen tray to your interactive whiteboard 23
Securing the pen tray to the pen tray brackets 24
Removing the pen tray 25
Refer to these topics for information about mounting your SMART Board 600 or D600 series interactive
whiteboard on a floor stand or on a wall.
Environmental requirements
Before installing the interactive whiteboard, review the following environmental requirements.
Environmental
requirement
Parameter
Operating temperature 41°F to 95°F (5°C to 35°C)
Storage temperature -40°F to 120°F (-40°C to 50°C)
Humidity
l
5% to 80% relative humidity, non-condensing
l
Humidity above 80% can cause slight wrinkling in the screen surface
sheet. The wrinkles disappear when the humidity lowers.
To Next Page
Loading...