SDRe Programming Software
3. File operations:
3.1. New program file creation:
Evenly when in the future you can use existing files as templates
to define the programming file of a repeater, the first time you must
start from scratch, cleaning the dashboard.
To create a new file you can use the quick access bar then click on
the new file shortcut or goes through [File] menu, and then select
[New]
Figure 14: New file access through File menu
3.2. Open an existing template or file
To open an existing file or a template, please proceed to click on [File]
then [Open].
To Next Page
Loading...