SDRe Programming Software
Figure 46: Access to Passwords programming screen
As soon as you click in [Passwords], the password programming
screen will be launched.
Figure 47: Installer and Data Base manager password protection screen
ST-91XX series offers two level of passwords protection: one for the
Technicians who install the repeaters, makes the alignment,
hardware programming, etc. and the second one for administrative
programmers, who only needs access to the repeater user database,
but no channel programming or alignment.
4.4.1. Installer Password:
This password enables the technicians to change the frequency
programming, align the entire repeater, and define the IP
environment parameters, Monitoring, Servers, etc., in local or
remote environment.
To Next Page
Loading...