SDRe Programming Software
Check Enable box to activate the service
Figure 44: POP3 Service configuration
4.3.6.2. Outgoing Services to the radios:
Outgoing e-mails coming from radios to the Internet must be
delivered from the repeater using SMTP service.
The SDR repeater has the SMPT Bridge embedded. You can
activate this service by filling the SMPT server IP address, port
and security mode, and then check the Enable box.
Figure 45: SMPT service configuration
4.4. Repeater and File Password Protection:
In most of the applications, it is important to protect programming
information.
To access to the password protection screen, please click on [Edit]
then click into [Passwords] tab.
To Next Page
Loading...