SmartTrunk Systems ST-9116 - Adding a New Digital Profile; Edit Digital Profile Name

SDRe Programming Software
Revision V1.0
P a g e | 59
4.6.2.1. Adding a new Digital Profile
To add a new Analog Profile, get focus on Digital Profiles area then
press Insert Key on your keyboard.
A new profile with default parameters will be created.
Figure 67: Default Digital Profile
4.6.2.2. Edit Digital Profile Name:
To edit the digital Profile name, focus your mouse pointer over
the Name filed on the Digital Profile TAB, then edit current name
as per your desire. Space character is invalid.
Figure 68: Changing the Digital Profile Name
Once you click on any other screen area, the new Profile Name is
updated.
Press OK to save the changes.