EasyManua.ls Logo

SmartTrunk Systems ST-9116 - Default MAC Address

SmartTrunk Systems ST-9116
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SDRe Programming Software
Revision V1.0
P a g e | 37
Figure 29: IP environment programming tab
4.3.2.1. Default MAC Address:
MAC address is a very important security parameter for any IP
network and additionally it may be used for external servers to
address a particular repeater into your network through the
routers.
Check this box to use the factory pre-assigned MAC address or
use your own if required, by typing it into the MAC field.
Figure 30: MAC address default setting
The MAC field is only active for typing if the Default MAC is not
selected.
Type 0123456789ab for MAC address 01:23:45:67:89:ab

Table of Contents