SDRe Programming Software
To save changes, press [Ok] or select other tab. If you want to cancel
the modifications for this tab, press [cancel].
4.3.6. E-mail Service configuration:
On this tab, you can program the required parameters to support e-
mail services.
Figure 43: E-mail services configuration
4.3.6.1. Outgoing Services to the radios:
Incoming mails from the Internet must be received from the
repeater using POP3 service to connect to an e-mail server.
Fill the Server IP address, the port and the security mode as per
your POP3 service.
To Next Page
Loading...