C
HAPTER
3
| Installing the Gateway Router
Bridge Mode Connections
– 37 –
1. Using Ethernet cable connect the Wireless Broadband Router’s LAN and
WAN ports to PCs or a LAN switch.
2. Power on the Wireless Broadband Router by connecting the AC power
adapter and plugging it into a power source.
C
AUTION
:
Use ONLY the power adapter supplied with the Wireless
Broadband Router. Otherwise, the product may be damaged.
When you power on the Wireless Broadband Router, verify that the Power
LED turns on and that the other LED indicators start functioning as
described under “LED Indicators” on page 25.
3. Connect an Ethernet cable from the Wireless Broadband Router’s LAN
ports to your PCs. Alternatively, you can connect to a workgroup switch
to support more wired users. The Wireless Broadband Router can
support up to 253 wired and wireless users
4. Set up wireless devices by pressing the WPS button on the Wireless
Broadband Router or by using the web interface. See “Initial
Configuration” on page 38 for more information on accessing the web
interface.
To Next Page
Loading...
Need help?
General
