– 55 –
6 INTERNET SETTINGS
The Internet Settings pages allow you to manage basic system
configuration settings. It includes the following sections:
◆ “WAN Setting” on page 55
■
“DHCP” on page 55
■
“Static IP” on page 57
■
“PPPoE” on page 58
■
“PPTP” on page 59
◆ “LAN Setting” on page 61
◆ “Advanced Routing” on page 63
N
OTE
:
In Bridge mode, the Wireless Broadband Router’s Internet Settings
options are significantly reduced, with only LAN Settings and the Client List
being available to the user.
WAN SETTING
The WAN Setting page specifies the Internet connection parameters. Click
on “Internet Settings” followed by “WAN”.
◆ WAN Connection Type — By default, the access point WAN port is
configured with DHCP enabled. After you have network access to the
access point, you can use the web browser interface to modify the
initial IP configuration, if needed. The options are Static IP, DHCP (cable
modem), PPPoE (ADSL), and PPTP. Each option changes the parameters
displayed below it. (Default: DHCP).
DHCP Enables Dynamic Host Configuration Protocol (DHCP) for the WAN port.
This setting allows the Wireless Broadband Router to automatically obtain
an IP address from a DHCP server normally operated by the Internet
Service Provider (ISP).
To Next Page
Loading...
Need help?
General
