C
HAPTER
6
| Internet Settings
Advanced Routing
– 65 –
◆ Use — Count of lookups for the route.
◆ Interface — Interface to which packets for this route will be sent.
◆ Comment — Displays a useful comment to identify the routing rules.
DYNAMIC ROUTE ◆ The Wireless Broadband Router supports RIP 1 and RIP 2 dynamic
routing protocol. Routing Information Protocol (RIP) is the most widely
used method for dynamically maintaining routing tables. RIP uses a
distance vector-based approach to routing. Routes are chosen to
minimize the distance vector, or hop count, which serves as a rough
estimate of transmission cost. Each router broadcasts its advertisement
every 30 seconds, together with any updates to its routing table. This
allows all routers on the network to build consistent tables of next hop
links which lead to relevant subnets.
◆ RIP — Enables or disable the RIP protocol for the WAN or LAN
interface. (Options: Disable/v1/v2, Default: Disable)
To Next Page
Loading...
Need help?
General
