C
HAPTER
9
| Administration Settings
SNTP Settings
– 101 –
SNTP SETTINGS
The System Management page allows you to manually configure time
settings or enable the use of a Simple Network Time Protocol (SNTP) or
NTP server.
Figure 53: SNTP Settings
◆ Current Time — Displays the current system time on the unit.
◆ Sync with host — Updates the unit's time from the web management
PC's system time.
◆ Time Zone — Specifies the time zone in relation to Greenwich Mean
Time (GMT).
◆ SNTP Server — The IP address or URL of the NTP server to be used.
◆ SNTP synchronization — Sets the SNTP sycnronization in hours.
To Next Page
Loading...
