SMH Technologies FlashRunner LAN 2.0 - General Features; Hardware Features; Software Features

10
2.1.1 General features
▪ Fastest programming algorithms (as fast as target device’s memory technology
limit), approved by silicon manufacturers;
▪ Up to 4 parallel and independent channels
▪ Easy ATE integration;
▪ Standalone operations
▪ Controllable by ATE through optoisolated LAN and USB, or parallel control lines;
▪ Supports most ISP protocols (BDM, JTAG, SPI, I2C, MON, ICC, SCI, UART, etc.);
▪ Flexible, fully configurable;
▪ Compact and robust design for production environments;
▪ 10Mbyte/sec host data transfer.
2.1.2 Hardware features
▪ ISP lines:
◦ 8 digital I/O lines; 1 ground line per signal;
◦ 2 programmable output voltages; 1 ground line per power line;
▪ 1 GBytes on-board RAM memory;
▪ On-board timekeeper and calendar for time-stamped log file;
▪ LAN Communication Interface
▪ Optoisolated USB communication interface.
▪ Optoisolated ATE interface for standalone operations
▪ Programming voltage measure of each channel
▪ Programming current measure of each channel
2.1.3 Software features
▪ Linux based operating system;
▪ FlashRunner 2.0 WorkBench: the new user-friendly Graphical User Interface
(Windows, Linux and Mac compatible)
▪ Controllable by any host system through a terminal utility and simple ASCII
protocol;
▪ Up to 32 hardware-selectable projects in Standalone Mode, unlimited software-
selectable projects in Host Mode;