SMH Technologies FlashRunner LAN 2.0 - DC Characteristics and Functional Operating Range

37
6.2 DC Characteristics and Functional
Operating Range
Table 15: DC Characteristics and Functional Operating Range
Parameter
Condition
Value
Min
Typ
Max
“ATE CONTROL” Connector
V
IL
(input low voltage) on lines START, SEL[4..0]
0V
-
0.8V
V
IH
(input high voltage) on lines START, SEL[4..0]
2.4V
-
15V
V
OL
(output low voltage) on lines BUSY, FAIL, PASS
I
OL
= 4mA
-
-
0.8V
V
OH
(output high voltage) on lines BUSY, FAIL,
PASS
4.5V
-
5V
“ISP” Connectors
V
IL
(input low voltage) on lines DIO
-
-
0.3V
PROG0
V
IH
(input high voltage) on lines DIO
Configured as digital lines
0.7V
PROG0
-
V
PROG0
V
OL
(output low voltage) on lines DIO, CLKOUT
Configured as digital lines,
V
PROG0
= 3V, I
OL
= 12mA
-
-
0.36V
V
OH
(output high voltage) on lines DIO, CLKOUT
Configured as digital lines,
V
PROG0
= 3V, I
OH
= 12mA
2.56V
-
-
V
OL
(output low voltage) on lines DIO, CLKOUT
Configured as digital lines,
V
PROG0
= 5.5V, I
OL
= 24mA
-
-
0.36V
V
OH
(output high voltage) on lines DIO, CLKOUT
Configured as digital lines,
V
PROG0
= 5.5V, I
OH
= 24mA
4.86V
-
-
I
OH
current (source) on lines DIO
Configured as input with active
pull-ups
-
3.8mA
-
VPROG0 output voltage
1.65V
-
5.5V
VPROG0 current (source)
-
-
200mA
VPROG1 output voltage
6V
-
13.5V
VPROG1 current (source)
-
-
300mA
“POWER” Connector
Supply voltage
15V
-
15V
Power consumption
-
-
5A