SMH Technologies FlashRunner LAN 2.0 - Cable Interface; Figure 14: Auxiliary Interface Expansion Board for Relay Barrier

32
5.2 Cable Interface
A cable interface is available for the FlashRunner LAN2P0 NXG to connect the targets
using our special twisted cables, keeping good signals integrity.
Each header connector (H1..H4) is the output of one programming channel and can
be connected to a FRHDRPSTR through a FRCABLE.
Figure 14: Auxiliary interface expansion board for relay barrier
Parameter
Value
FR2P0INTF08 Dimensions
60 x 40 x 19 mm
FRHDRPSTR Dimensions
46 x 30 mm
“ISP” connectors type
48 way, 3 row, DIN 41612, pitch = 2.54mm
Header connectors type
20 way, 2 row, pitch =1,27mm
H1-2
H1-1
H3-2
H4-2
H3-1
H4-1
H2-2
H2-1