SMH Technologies FlashRunner LAN 2.0 - Technical Specifications; Absolute Maximum Ratings

36
6 Technical Specifications
6.1 Absolute Maximum Ratings
Table 14: Absolute Maximum Ratings
Parameter
Value
“POWER” Connector
Supply voltage on line POWER (reference GND)
+15V
“ATE CONTROL” Connector
Maximum input voltage on lines START, SEL[4..0], SG[1..0]
-2V to +20V
Maximum current on lines BUSY, PASS, FAIL
±10mA
“ISP GROUP” Connectors
Maximum input voltage on lines DIO/AO[1..0], DIO[6..2], CLKOUT
-1V to +5.5V
Maximum current on lines DIO
±24mA
Maximum current on line VPROG0
200 mA
Maximum current on line VPROG1
300 mA
“Relay Barrier”
Coil Supply Voltage
15V
“RLY_ON” signal Voltage
3.3V
Maximum current on lines RLY_ON
±10mA
i
Note: Keep FlashRunner LAN 2.0 Next Generation always in a well-
ventilated area in order to prevent product overheating, which could
affect product performances and, if maintained for long time, it could
damage product hardware components.