16 / 58
3.2 MACHINE IDENTIFICATION
3.3 MAXI PRODUCT DIMENSIONS
3.4 MACHINE LIMITATIONS AND SPECIFICATIONS OF USE
The following cannot be packaged:
• Product with sizes higher than those permitted.
• Wet products.
• Inflammable products.
• Explosive products.
• Aerosol bombs of any kind.
• Loose powders and volatile products
It is forbidden to:
• Modify the machine cycle;
• Use non original parts;
• Modify the electrical connections to by-pass the internal safeties;
• Remove the protections installed
Before performing any modification it is necessary to contact SMIPACK S.p.A to obtain the
relevant authorization.
ATTENTION!
It is not possible to pack anything that can in any way be dangerous to the user and
damage the machine itself.
3.5 OPERATING FEATURES OF THE MACHINE
The machine ßP700AR/310 can produce a maximum of 10-12 packs per minute.
Fig. 3.2.1
On the rear of every machine is applied a
nameplate showing the EC marking, the
main technical data such as model, serial
n., power, etc., to be notified to the builder
in case of problems.
Fig. 3.3.1
ßP700AR/310
X
340 mm
Z
350 mm
Y
440 mm
N.B. Products having a height less than 10 mm cannot be packaged.
To Next Page
Loading...
