58 / 58
PROBLEM 17: Reserved menu data loading problem caused by an error in the stored
values.
Solution:
• Check that the menu reserved settings are configured for the model of the machine used
• If the problem continues, switch power off and contact the service centre
PROBLEM 99: Software problem
Solution:
• Stop the machine and start it again.
• If the problem continues, switch power off and contact the service centre
The key allows you to cancel problems, this occurs only if these do not reappear
immediately.
SMIPACK S.p.A. is absolutely not responsible for any direct or indirect consequences due to the
proper or improper use of this issuing of the system software.
SMIPACK S.p.A. has the right to make technical modification on their system and in their manual
without informing the users.
To Previous Page
Loading...
