Tools Tools Menu
40
Font Type
This option allows you to select between standard and bold faced type for the
display screen. Bold type makes screen writing more legible under poor lighting or
bright sunlight conditions.
Selecting opens a menu with two choices: Normal Font and Bold Font. Select a
menu item or scroll and then press the Y/a button to make a selection. The change
is instantaneous. Select the Back or Home icon on the toolbar to return to either the
Settings menu or the Home screen.
Figure 6-6 Bold Type
Backlight Time
This option allows you to configure how long the screen backlight remains on when
the diagnostic tool is inactive. The following choices are available:
• Always On
• 15 Seconds
• 30 Seconds
• 45 Seconds
• 60 Seconds
Select the menu item desired, or scroll and then press the Y/a button to make a
selection. Select Back or Home on the toolbar to return to either the Settings menu
or the Home screen.
Touch Screen Calibration
Calibrating the touch screen maintains the accuracy of the touch-sensitive display.
To avoid serious damage to the diagnostic tool, always complete the
touch screen calibration sequence once it has begun. Never turn off the
diagnostic tool while a screen calibration is in process.
z To calibrate the touch screen:
1. Select Tools from the Home screen.
2. Select Settings>System Settings>Display>Touch Calibration.
The calibration screen opens (Figure 6-7).
Figure 6-7 Touch screen calibration
3. Select the center of each alignment indicator on the screen as they display in
the corners of the screen, starting in the upper left corner.
4. Once all four indicators have been selected, the verification process starts the
procedure again. Select the center of each alignment indicator when
prompted.
To Next Page
Loading...
