Scanner - Automotive Viewing and Saving Data (PIDs)
29
Toolbar control icons are described in Scanner Control Icons on page 27 and
Common Toolbar Control Icons on page 9.
After Pause is pressed:
• Review control icons are displayed in the toolbar (Figure 6-13). Use the control
icons to accurately move through the data.
• The blue (vertical cursor) (Figure 6-13) indicates your position in the data and
is denoted by the current position value in the counter display. This cursor
displays in all PIDs.
Figure 6-13
The Shortcut icon can be set to perform the Pause/Play function. See
Configure Shortcut Button on page 79 for additional information.
z To resume data collection (after pausing):
• Select the Start icon .
The screen changes back to display data (Figure 6-14).
A vertical gray cursor is displayed on all PIDs, indicating where the data was
paused (Figure 6-14).
Figure 6-14
To Next Page
Loading...