BTP-M280 User’s Manual
- 7 -
2.5 Print and Tear-off Position
2.5.1 Print position
L1: Paper width
L2: Print width
L3: Print left margin
L4: Print right margin
According to the different paper width of the L1, the print width (L2) and the left/right margin (L3/L4)
should be changed as below:
Paper width (L1) Print width (L2) Left margin (L3) Right margin (L4)
80/76mm 63.4mm 6.8mm 5.8mm
69.5mm 57mm 6.8mm 5.7mm
57.5mm 47.5mm 6.8mm 3.2mm
2.5.2Tear-off position
L1: About 21.5mm
L2: About 34mm
To Next Page
Loading...
