SNBC BTP-M280 - Power Interface Definition; Cashdrawer Definition

BTP-M280 User’s Manual
- 33 -
6.6 Power interface definition
1) Pin definition
1: Positive pole (+24V)
2: Cathode（GND）
3: NC
2) Interface type
Printer end should use: Unetop DC-002 or equivalent product.
User end should use: Unetop DP-002 or equivalent product.
6.7 Cashdrawer definition
1) Electrical features
¾ Driving voltage: DC 24 V
¾ Driving current: Max 0.8 A (within 510 ms)
¾ Cash drawer status inspection signal:
“L” = 0～0.5 V
“H” = 3～5 V
2) Cash drawer interface outlet uses RJ11 6P connector.
3) Interface signal definition
Items Signal Functions
1 FG Frame Ground
2 DRAWER 1
Cash drawer 1 driving signal
3
DRSW
Cash drawer status test signal
4 VDR
Cash drawer driving power
5 DRAWER 2 Cash drawer 2 driving signal
6
GND Circuit share ground
Caution:
 Do not connect or disconnect signal cable when printer power is on.
 Signal cable should be far away strong current.
 Signal cable should be far away from strong current sources.