RS485 communications mode for single inverter( )
When RS485 communications mode is applied to monitor the inverter there are two ways for,
connecting to the inverter connecting to single inverter and to multiple inverters Figure 5 16: . .
demonstrates connection to single inverter to implement RS485 communications.
Figure 5 16 RS485 communications mode for a single inverter.
Inverter Data Logger
Router Modem/ Cloud Sever Terminal Device
RS485 communications mode for multiple inverters( )
Inverter
Data Logger Router Modem/ Cloud Sever
Terminal Device
Figure 5 17 RS485 communications for multiple inverters.
30
To Next Page
Loading...
