SolaX Power X3 Series User Manual

34
6 System Operation
6 1 Powering ON the Inverter.
Step 1: Switch ON the AC circuit breaker.
.Set the DC SWITCH of the inverter to ON
. .Observe statuses of LED indicator lights on the inverter according to Table 7 2
Step 2:
Step 3:
When LED status lights display the inverter has entered
grid-connecting it means the inverter is operating well Any query, .
during operating the PV inverter call your dealer, .
6 2 Powering OFF the Inverter.
Step 1: Switch off the circuit breaker at AC terminal.
Step 2: Set the DC SWITCH to OFF.
After the inverter powers off the remaining electricity and heat may,
still cause electrical shock and body burns Please only begin.
servicing the inverter ten minutes after the power-off.
WARNING
NOTE

SolaX Power X3 Series Specifications

General

IP Rating	IP65
Frequency	50Hz / 60Hz
MPPT Efficiency	99.9%
Communication	WiFi / GPRS / Ethernet
Operating Temperature Range	-25°C to +60°C (derating above 45°C)
Number of MPPTs	2
AC Output Voltage	230V
MPPT Range	125V-550V