SOLIS 4G series - Export Power Set; Restart HMI; Debug Parameter; DSP Update

6.5.13 Restart HMI
6.5.14 Debug Parameter
This function is used for manufacturer maintenance personnel only.
ThefunctionisusedforrestarttheHMI.
This function is for maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6.5.12 External EPM Set
Figure 6.46
->5G-EPM
Others-EPM
This setting should only be turned on when Solis external EPM device is used.
Two options are available：5G-EPM and Others-EPM.
5G-EPM Failsafe Option should be turned ON when 5G series EPM device is used
Others-EPM Failsafe Option should be turned ON when 2G series EPM device is used
Only one option can be activated each time.
6.5.15 DSP Update
The function is used for update the DSP.
This function is for maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6. Operation
User Manual
48