SOLIS 4G series - Grid ON;OFF; Clear Energy; Reset Password; Power Control

6.5.2 Grid ON/OFF
This function is used to start up or stop the power generation of Solis Single Phase Inverter.
Grid ON
Grid OFF
Figure 6.18 Set Grid ON/OFF
Screens can be scrolled manually by pressing the UP/DOWN keys. Press the ENTER key
to save the setting. Press the ESC key to return to the previous menu.
Enter the right password before set new password. Press the DOWN key to move the
cursor, Press the UP key to revise the value. Press the ENTER key to execute the setting.
Press the ESC key to return to the previous menu.
6.5.5 Power Control
This section is for setting the active and reactive power.
Within this section there are five functions:
1. Set output power
2. Set Reactive Power
3. Out_P With Restore
4. Rea_P With Restore
5. Select PF Curve
→
This function is used to set the new password for menu “Advanced info.” and “Advanced
information” (see Figure 6.19).
6.5.4 Reset Password
Figure 6.19 Set New Password
YES=<ENT> NO=<ESC>
Password: 0000
6.5.3 Clear Energy
Clear Energy can reset the history yield of the inverter.
6. Operation
User Manual
30