SOLIS 4G series - Advanced Settings; Select Standard

6.5 Advanced Settings - Technicians Only
Select Advanced Settings from the Main Menu to access the following options:
1. Select Standard
2. Grid ON/OFF
3.Clear Energy
4. Reset Password
5. Power Control
6.Calibrate Energy
7.Special settings
8 STD. Mode Settings.
9 Restore settings .
10. HMI Update
11. Internal EPM Set
12. Export Power Set
13. Restart HMI
14. Debug Parameter
15. DSP Update
16. Compensation Set
NOTE:
This area is for fully qualified and accredited technicians only.
Please follow 6.4 to enter password to access this menu.
This function is used to select the grid's reference standard (see Figure 6.16).
YES=<ENT> NO=<ESC>
Standard:G59/3
Figure 6.16
6.5.1 Selecting Standard
6. Operation
User Manual
28
Press the UP/DOWN keys to select the standard (UL-240V-18, UL-208V-18, R21P3-240,
R21P3-208, ISONE240, ISONE208, MEX-CFE, User-Def, etc.).
Press the ENTER key to confirm the setting.
Press the ESC key to cancel changes and returns to previous menu.
There are 6 settings for US market, UL-240V-18, UL-208V-18, R21P3-240, R21P3-208,
ISONE240, ISONE208.