User Manual
6. Disconnect the fan connector carefully and take out the fan.
7. Clean or replace the fan. Assemble the fan on the rack.
8. Connect the electrical wire and reinstall the fan assembly. Restart the inverter.
Figure 7.3
7.2 Fan Maintenance
If the fan does not work properly, the inverter will not be cooled effectively.
and it may affect the inverter operation. A warning message will be displayed on the LCD.
Therefore, it is necessary to clean or replace a broken fan as follows:
1. Turn off the “Grid ON/OFF” switch on the inverter LCD ( Section 6.2).
2. Disconnect the AC power.
3. Turn the DC switch to "OFF" position.
4. Wait for 1 5 minutes at least.
NOTE
If you need to maintain the inverter at night, please turn off the AC switch first,
then turn off the DC switch, and wait 5 minutes before you do other operations.
5. Remove the 4 screws on the fan plate and pull out the fan assembly slowly.
Figure 7.2
7. Maintenance
68
To Next Page
Loading...
