Sonel MPI-520 - Page 33

MPI-520 OPERATING MANUAL version 3.4
31
R
X
R+
ISO
R-
ISO
The meter is ready
for measurement.
Press and hold START push-
button.
Measurement is performed contin-
uously when the push-button is held
in the pressed position.
In order to maintain the
measurement, press ENTER push-
button while holding START push-
button in the pressed position. In
order to interrupt the mesaurement,
press START push-button again.
View of the screen
during measurement
performed with the
use of ENTER push-
button.