Sony CFD-S22 - Playing a CD; Listening to the Radio

– 6 –
1 Press CD (direct power-on).
3 Close the CD compartment.
4 Press u (N on the remote, CFD-S32 only).
The player plays all the tracks once.
Track number Playing time
To
adjust the volume
stop playback
pause playback
go to the next track
go back to the previous track
remove the CD
turn on/off the player
c
Playing a CD
Press
VOLUME +, – (VOL +, – on the remote,
CFD-S32 only)
x
u (X on the remote, CFD-S32 only)
Press the button again to resume play after
pause.
>
.
Z PUSH OPEN/CLOSE
POWER
1 Press RADIO BAND•AUTO PRESET until the band you
want appears in the display (direct power-on).
Each time you press the button, the indication changes as
follows: “FM1” t “FM2” t “AM”.
2 Hold down TUNING + or – (TUNE + or – on the remote,
CFD-S32 only) until the frequency digits begin to change
in the display.
The player automatically scans the radio frequencies and
stops when it finds a clear station.
If you can't tune in a station, press the button repeatedly
to change the frequency step by step.
To
adjust the volume
turn on/off the radio
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for AM.
FM AM
Tips
• The "FM1" and "FM2" bands have the same functions. You can store
the stations you want separately in "FM1" and "FM2".
• If the FM broadcast is noisy, press PLAY MODE•MONO/ST until
"Mono" appears in the display and the radio will play in monaural.
Listening to the radio
Press
VOLUME +, – (VOL +, – on the remote,
CFD-S32 only)
POWER
Display
Display
2 Press Z PUSH OPEN/CLOSE down to open the CD
compartment and place a CD in the CD compartment.
With the labeled side up
c
Display