Sony DCR-TRV8 - Evf; Board

2-3
2-4. EVF
2 Two screws
(M1.7
× 6) B tight
1 Screw
(M1.7
× 2.5)
3 FP-87 flexible board
CN5101 27P (DD-123 board)
4 Flexible retainer sheet
5 Two tapping screws
(M1.7
× 6)
9 EVF assembly
(Remove the assembly
while holding it upward.)
8 Tilt down the EVF.
6 Tilt up the EVF.
7 Screw (M1.7) lock ace
2-5. LB-60 BOARD
1 Two tapping screws
(M1.7
× 6)
3 VF lens assembly
6 Two claws
4 FP-87 flexible board
CN5201 27P (LB-60 board)
5 Flexible board (LCD)
CN5202 16P (LB-60 board)
7 LCD cushion (455)
!™ LB-60 board
9 LCD cushion (455)
!¡ LCD cushion (1)
!º LCD
8 BL illuminator (455)
2 VF cabinet (upper) assembly
Note when installing the LB-60 board
The portion that is shown by the illustration, can be easily
caught during reassembling.
Be careful not to damage or break the portion shown.