Sony DCR-VX2000 - Page 111

Changing the menu settings
POWER
Icon/item Mode Meaning switch
CM SEARCH • ON To search using cassette memory (p. 64, 66, VCR
67,69).
To search without using cassette memory.
To label a cassette (p. 103).
TAPE TITLE
TITLE DSPL • ON
OFF
TITLEERASE
ITEM ERASE
ERASE ALL
REC MODE • SP
LP
AUDIO MODE • 12BIT
16BIT
OFF
VCR
CAMERA
To display the title you have superimposed. VCR
Not to display tile title.
To erase the title you have SUl)erimposed VCR
(p. 100). CAMERA
To erase each item's data in cassette VCR
memory (p. 105). CAMERA
To erase all the data in cassette memory VCR
(p. 106). CAMERA
c_
To recoM in tile SP (Standard Play) mode. VCR
To increase tile recording time to 1.5 times CAMERA
the SP mode. _-
To recoM in 12-bit mode (two stereo VCR c_
-<
sounds). CAMERA o
c
To recoM in 16 bit mode (one stereo sound c_
with high quality).
rD
Notes on the kP mode
• When you record a tape in tile LP mode on your camcorder, we recommend playing
back the tape on your camcorder. When you play back tile tape on other camcorders
or VCRs, noise may occur ill pictures or sound.
• When you record in tile LP mode, we recommend using a Sony Excellence/Master
mini DV cassette so that you can get the most out of your camcorder.
• You cannot make audio dubbing on a tape recorded in the LP mode. Use tile SP mode
for the tape to be audio dubbed.
• When you record in tile SP and LP modes on one tape oi" you record some scenes in
the LP mode, the playback picture may be distorted or tile time code may not be
written properly between scenes.
Notes on AUDIO MODE
• You cannot dub an audio sound on a tape recorded in tile 16 bit mode.
• When playing back a tape recorded in tile 16-bit mode, you cannot adjust tile balance
in AUDIO MIX.
111