Dubbing only desired scenes - Digital program editing
Tile IR SETUP code is stored in tile memory of your camcorder. Be sure to set tile
correct code, depending on your VCR. Code number 1 is tile default setting.
Brand Remote control code Brand Remote control code
Sony l, 2, 3, 4, 5, 6 Nokia 89, 36
Aiwa 53 Nokia Oceanic 89
Akai 62, 50, 74 NoMmende 76, 100
Alba 73 Okano 60, 62, 63
BalM 36, 30 Orion 70, 58*
Blaupunkt 83, 78 Panasonic 16, 78, 96
Bush 74 Philips 83, 84, 86
Canon 97 Phonola 83, 84
CGM 47, 83, 36 Roadstar 47
Clatronic 73 SABA 76, 21
Daewoo 26 Samsung 93, 94, 52, 22
Ferguson 76 Sanyo 36
Fisher 73 Schneider 84, 10
Ftmai 80 SEG 73
Goldstar 47 Seleco 47, 74
Goodmans 26, 84 Sharp 89
Grtmdig 83, 09 Siemens 10, 36
Hitachi 42, 56 Tandberg 26
ITT/Nikia 36 Telefunken 91, 92
Instant Thomson 76
JVC 12, 21, 15, 11 Thorn 36, 47
Kendo 47 Toshiba 40
Loewe 16, 47, 84 Universum 92, 70, 47
Luxor 89 W.W. House 47
Mark 26* Watson 83, 58
Matsui 47, 60, 58*
Mitsubishi 28, 29 * TV/VCR component
Note on remote control code
You cannot do assemble editing with some VCRs (fbr recording) if tile remote control
code does not correspond to this camcorder (for playback).
77
To Next Page
Loading...
