Dubbing only desired scenes - Digital program editing
Confirming the VCR operation
(1) Insert a recordable tape into tile VCR, then set it to recording pause.
(2)Turn tile SEL/PUSH EXEC dial to select IR TEST, then press the dial.
(3)Turn tile SEL/PUSH EXEC dial to select EXECUTE, then press tile dial.
If tile VCR starts recording, the setting is correct.
When finished, the indicator changes to COMPLETE.
(c)
When the VCR does not operate correctly
Set tile IR SETUP code, or select tile button to cancel tile recording pause on tile VCR.
79
To Next Page
Loading...
