3
Close
the
paper
tray
cover.
4
Open
the
slide
cover.
5
Insert
the
paper
tray
into
the
printer.
..
• You can set up to 20 sheets
of
print paper. Riffle
the print paper thoroughly. Insert the print paper
with the protective sheet facing up. Then remove
the protective sheet.
• Insert the print paper with its printing surface (the
side with no imprint) facing
up.
• Do not touch the printing surface. Fingerprints
or
contamination on the printing surface may result in
imperfect printing.
• Do not bend the print paper, or cut the print paper
from the perforations before printing.
• To avoid paper jam or malfunctions
of
the printer,
make sure
of
the following before printing:
- Do not write or type on the print paper.
- Do not attach a sticker or stamps on the print
paper.
When adding print paper to the paper tray, be
sure that the total number
of
print paper sheets
does not exceed 20 sheets.
- Do not insert different types
of
print paper
together into the paper tray.
- Do not print on used print paper. Printing an
image twice on the same paper will not make
the printed image thicker.
- Use the print paper for this printer only.
- Do not use print paper ejected without printing.
Notes on storing the print paper
• To store print paper
in
the tray, remove the paper
tray from the printer and close the slide door
of
the
paper tray.
• Avoid storing the paper with the printed faces
touching each other or
in
contact with rubber or
plastic products, including vinyl chloride or
plasticizer for an extended period
of
time; color
changes or deterioration
of
the printed image may
occur.
• Avoid placing the print paper
in
a location subject
to high temperatures, high humidity, excessive
dust or direct sunlight.
• When you are going to store partially-used print
paper, store it in its original bag or a similar
container.
11
GB
I
To Next Page
Loading...
Need help?
General
