-
• After the AUTO TOUCH-UP adjustment, you
cannot make a trimming print
of
an image that has
been enlarged by pressing
~.
• Depending on the image, a face may not be
automatically detected.
If
the brightness
of
the face
is not adjusted properly, select "Adjust" from the
Edit menu to adjust the brightness manually
(page 22).
• Depending on the image, the out-of-focus
phenomenon may not be corrected. In this case,
use the "Sharpness" function from Adjust
in
the
Edit menu to adjust the sharpness manually
(page 22).
• Out-of-focus reduction does not take effect on blur
caused by shaking
of
the camera.
• Depending on the image, the red-eye phenomenon
may not be corrected. In this case, perform red-eye
correction to make red-eye adjustments manually
(page 24).
Correcting
a
failed
photo
automatically
(AUTO
TOUCH-UP)
1 Select the image that you want to
adjust and then press AUTO
TOUCH-UP.
Adjustment
of
the selected image starts.
The adjustment results will be displayed
on the screen. When a human face is
detected, the face
is
displayed with a
frame
as
the adjustments proceed.
To
check
the adjustment result
more clearly:
Press
~
to enlarge the image. (The image
will not be enlarged when printed.)
To
display
the
original
image
(before adjustments) again
Press AUTO TOUCH-UP. To display the
adjusted image, press AUTO TOUCH-UP
again.
Red~
I~
I
FotoNatiorT
The automatic red-eye
correction function
of
this
printer uses the technology
of
FotoNation Inc.
in
the U.S.A.
If
you
have set a
print
quantity
for
mUltiple images
All the images with print quantity settings
are adjusted. To display other images,
press
<lIt>.
To change the
print
quantity
Press ENTER to display the print quantity
indication. Then press
bJ'l
to set the print
quantity and then press ENTER.
2 Press PRINT.
Printing
of
the selected image(s) starts.
TIP]
Adjustment takes effect only on the image being
printed. The original image will not be adjusted.
20 GB
SILKYPIX~
The "Skin Smoothing" correction function
of
the printer uses the technology
of
Ichikawa
Soft Laboratory.
To Next Page
Loading...
Need help?
General
