1 From the
1,;,;)
Edit menu (page 18),
press
<I/~
to select
rm
(Adjust) and
then press ENTER.
The Adjust menu
is
displayed.
2 Press t:JV to select the desired
adjustment tool and press ENTER.
The adjustment screen
of
the selected tool
appears.
When "Brightness" is selected.
1
From
the-"
Edit menu (page 18),
press
<I/~
to select D (Filter) and
then press ENTER.
The Filter menu is displayed.
Press
<lIt> to adjust an image while
checking the level.
The image before adjustment
is
displayed
on the left half
of
the screen, and the
adjusted image is displayed on the right.
• Brightness: Press
t>
to brighten the
picture or
<l
to
darken
it.
• Tint: Press
t>
to
make the picture
greenish or
<l to make it reddish.
• Saturation: Press
t>
to deepen the
colors or
<l to lighten them.
• Sharpness: Press
t>
to sharpen the
outlines or
<l to soften them.
3 Press ENTER.
The adjustment takes effect.
4 Press PRINT.
22 GB
Single
Color
Painting
Cross
Filter
Partial Color
"T
:l3Di3lJ
to
select
item.
2 Press t:JV to select the filter you
want to add to the image.
• No Filter: No special filter
is
used on
the image (default setting).
• Single Color: Changes all the colors
except for the one specified color into
gray scale.
• Painting: Makes the image look like a
painted picture.
SILKYPIX~
The "Painting" filter of the printer
is
uses the
technology
of
Ichikawa Soft Laboratory.
• Cross Filter: Adds a cross, starburst
effect to the light source to print an
image with a sparkling impression.
• Partial Color: Makes the
surroundings
of
the subject
monochrome to emphasize the subject
in
the center.
• Sepia: Changes the image
to
look like
an old photograph with faded colors.
• Monochrome: Changes the image
into a black and white picture.
To Next Page
Loading...
Need help?
General
