Printing
from
an
external
device
You can connect a mass-storage-complaint
digital camera, a USB memory, a photo storage
device, digital photo frame, or other external
device and print an image directly from the
external device.
-
• We cannot guarantee connection with all types
of
mass storage devices.
•
If
a memory card is inserted
in
the printer, the
printer cannot read the signal from an external
device connected to the PictBridgelEXT
INTERFACE connector
of
the printer. Remove the
memory card,
if
any.
1 Set your digital camera or other
external device ready for printing
with the Mass Storage-compliant
printer.
The settings and operations that are
necessary before connection differ
depending on the external device you use.
For details, see the operating instructions
of
the external device. (In case
of
Sony
Cyber-shot digital camera, for example,
select "Normal" mode or "Mass Storage"
mode for the "USB Connect." )
2 Connect the printer to the AC power
source (page 12).
3 Press the
CJ
(on/standby) button to
turn on the printer.
4 Connect an external device such as
a USB memory to the PictBridge/
EXT INTERFACE connector of the
printer.
Use a USB cable supplied with your
digital camera or external device. You can
enjoy direct printing.
46 GB
To PictBridge/EXT INTERFACE
connector
PietBridge
EXT
INTERFACE
External device such
as a USB memory
-
•
If
you use a commercially available USB cable,
please use the A-TYPE USB cable
of
shorter than
3m
in
length.
• While the access indicator
of
the external device
is
flashing, never tum off the power
of
the printer or
an external device nor remove the external device.
The data inside the external device may be
damaged. We cannot compensate for any damages
that may be caused by data loss ordamage.
• You cannot use a USB hub
or
a USB device
equipped with a USB hub.
• Encoded or compressed data
by
fingerprint
authentication or password cannot be used.
To Next Page
Loading...
Need help?
General
